| Bungalow Applications
|
| |
Box Gutter Installation
 |
| |
| Box Gutter Timber Conservatories |
 |
ELTECH have designed the 200mm Box
Gutter specifically for these applications. Assume
that your Soffit was 500mm wide or more - you may have a problem in
fitting big brackets! |
| |
| ELTECH automatically supply 120mm
long x 10mm diameter stainless steel coach screws with 17mm
heads to screw deep into the Rafter ends through the
Fascia Boards. This is unique to ELTECH and will
carry glass roofs and take the discharge from the main
roof also. |
| |
| Box Gutter uPVC and Aluminium
Conservatories |
 |
This illustration shows the
thermal cladding essential to eliminate condensation
going right up to the underside of the glazing, and the
supplied stainless steel coach
screws into the Rafter ends. |
| |
 |
This illustration shows a very
typical Bungalow application Gutter fixed deep into the
Rafter ends, through the Fascia using the stainless steel
coach screws (10mm diameter x 120mm long). It shows
the Valley discharge into the welded internal corner, and
the roofing felt under the tiles coming over the top edge
of the gutter. No brackets needed under ELTECH Box
Gutters. |
| |
| The illustration below shows a 200mm box
gutter on the left and back wall running into a 400mm Flat
Valley gutter.
|
| |
 |
